Art Tech ISF Indoor Radio Control Airplane Rp 400.000

Pesawat RC dengan ukuran mini, cocok untuk beginner, mudah diterbangkan dengan harga terjangkau.

Dapat digunakan untuk terbang outdoor apabila kecepatan angin dibawah 3m/s.

Bahan tahan banting, tidak mudah rusak sehingga cocok untuk pemula dan anak-anak

FIRELAP 1:28 RC CAR READY TO RUN 2.4 GHZ only IDR 777.000

Firelap 1:28 RC Car 2,4 GHz ready to run Rp 777.000

-No crystals needed! 2.4GHz system blocks interference.
- Using 2.4GHz frequency, the transmitter and chassis automatically lock on to open bands with the 2.4GHz system.
- Allows up to 100 cars to be raced at the same time.
- Simple pairing process , fail-safe function

Features:
1. A high performance chassis which can run at very high speeds.
2. Includes a 2.4GHz digital transmitter with many different advanced functions which only can see in professional or semi-professional RC.
3. The transmitter also sports a module box and is compatible with Futaba receivers.
4. Players can upgrade the performance by applying any other Racer 2.0 parts and other parts for Mini-Z MR02.
5. One set completed with a controller, one car, a bag of spare parts.
6. Body:
- Clear ABS material
- Factory painted
- Glossy coating applied
- Clear front and rear lamps
- Compatiable with Kyoshi mini-z
7. Battery Requires:
- 8 x AA for transmitter
- 4 x AAA for chassis

Spec:
Scale: 1:28
Size: 16*8.5*5cm
Tranmistter: 2,4GHz
Functions: forward, backward, turn left/right
CE-, FCC-certified
Control distance: 100metres
Speed: 5 metres per second



Models available :

Bantam e-Station LP4 LiPo Charger

The Bantam e-Station LP4 LiPo Charger is a user-friendly DC LiPo charger with automatic functions. It auto-detects voltage of the battery packs being connected and has safety features that prevents over-charging.

Specifications:

• Input Voltage:DC11.0V~15.0V
• Li-Polymer:3.70V~14.80V(1~4 series)
• Charge Current: Auto (max. 2.5A)
• Dimensions: (W)106mm x (H)41mm x (D)12mm

ElyQ 10A/100Apk 2 Output Progr.Voltage Reg. (5V+5-6-7.2V / Bypass)

ElyQ 10A /100A pk 2 Output Prog Voltage Regulator as used by: Danny Szabo, Marcus Kim, Andy Hornyak, Giuseppe Robertone, Brandon Updike etc.

ElyQ has developed a wide experience in the field of converting power energy, through a specific unit inside ElyQ that has been working for years in the matter. In this sense, such a matter has been tested through power supplies AC/DC, DC/DC and UPS (Uninterruptible Power Supplies) also of a high level rank power (60KW).

* Separate outputs: 1 output at 5V (5Amps) dedicated specifically to RX, this guarantees a perfect current avoiding disturbs created by power services. The other output is related to power and it is subjected to be programmed. The output can be programmed up to 5V ­ 6V ­ 7.2V and in by ­ pass mode (current reaches directly the final output) and a formidable power capacity to support the ultimate generation high peak servos (from 10A to 100A).

* Light Weight: about 20 g and reduced dimensions (50 x 37 x 13 mm).

* Multi battery type: the regulator support Lipo, LiFe, Lion, NiCd and NiMh batteries. In the case of Lipo, LiFe and Lion, only 2 cells are foreseen, while NICD batteries can have from 5 to 7 cells. It is obvious that the possibility of programming batteries is a good enhance for current peak and life of themselves.

* Precision V ­ Meter: The user can check precisely the state of the art related to the charging of the batteries through 5 leds.

* Very low consumption: in OFF modality (useful to reduce the problem of discharging, either if the user forgets the battery switched on or the limit is over due when not in use for a long time). The layout, the circuital typology and the fact that RX are supplied separately, avoid the need of further filters on the power alimentation circuit. The programmability management is allowed trough a microprocessor.

NEW From E-Sky TWF : BELT CPX 6 CH ELECTRIC ONLY Rp 2.800.000,-

BELT CPX NEW FROM ESKY TWF

RP 2.900.000 ,-

【Specifications】		【Power and Radio Equipment】
· Main Rotor Diameter:680mm · Tail Blade Diameter:130mm · Length:650mm · Width:158mm · Height:230mm · Gear rate:14:1:5 · Weight:approximately:670g(including battery)		· 6-channel Transmitter · 6-channel Receiver · 7.5g Digital Servos（1.0kg.cm,0.1s/60°）× 4pcs · Brushless ESC 25A · Head Lock Gyro · 480 Brushless Motor · Li-po Balance Charger,Switching Adaptor,4 Dry Batteries · 11.1V 1800mAh Li-polymer Battery
【Products features】
· Aerodynamically-shaped canopy set, more suitable for 3D aerobatic flight; · Newly-designed rotor head system provides precise and quick reaction; · Digital Servos provides quick and precise reaction; · 100% assembled and tested at the factory, ready-to-fly out of the box; · Several canopy options provided for the customers.